| Heat Pump Comparison |
| Page: Ductless Heat Pump |
If you are considering a ductless heat pump for your home or business here are a few things to look at before making your final decision.
Ductless heat pumps are suitable for both replacement of existent heating systems, particularly baseboard/wall heaters, in addition to new building. Ductless heat pumps have been put in commercial buildings for more than twenty years and are available from a lot of producers.
Ductless heat pumps are really efficient for a lot of reasons: because the heated up or cooled down air is extradited directly to the room, ductless heat pumps nullify efficiency losses connected with ductwork which is commonly 15-20 percent.
Varying speed compressor Units, commonly marked “inverter technology,” nullify on-off cycling losses and are capable to allow for functional heat efficiency on all but very frigid days.
Since they allow for heat/cooling to particular regions of the home, they may be more efficient for each “zone” can be heated up to the sought after temperature.
Ductless models are occasionally called a “minisplit” heat pump* and have an exterior compressor unit and one or
more inside “heads” that deliver conditioned air out to the room or rooms. Interior
units are generally mounted high on the wall, but certain units may be deep-set in the ceiling or even set up with
a short duct run to process adjacent
rooms.
The indoor and outdoor units are attached by refrigerating lines, commonly concealed in the walls or ceilings or below a concealment on the outside of the house.
A few models allow for numerous indoor heads to be attached to a single outdoor compressor.
Virtually all Modern ductless heat pumps use the newer, less environmentally-harmful refrigerant R-410a. Depending on the rated capacity, they require 110 or 220 volt AC power.